CAD/CAM Connect Websites Terms & Conditions
Welcome to the CAD/CAM Connect websites www.cadcamconnect.com and www.cadcamreviews.com (the “Websites”). These Websites are provided to help visitors and subscribers gather technology vendor information, learn best practices, post comments and ratings of vendor/supplier related products, and engage in interactive technology discussions.. The terms “we”, “us”, “our” and “CAD/CAM Connect” refer to CAD/CAM Connect a Texas corporation and/or our subsidiaries. The term “you” refers to the customer visiting the Websites and/or contributing content on the Websites.
The Websites are offered to you conditioned upon your acceptance without modification of any/all the terms, conditions, and notices set forth below (collectively, the “Agreement”). By accessing or using the Websites in any manner, you agree to be bound by the Agreement.
USE OF THE WEBSITES
As a condition of your use of these Websites, you warrant that (i) all information supplied by you on the Websites is true, accurate, current and complete, (ii) if you have a CAD/CAM Connect or CAD/CAM Reviews account, you will be completely responsible for any use of your account by anyone other than you and (iii) you are 18 years of age or older in order to register-subscribe for an account and contribute to our websites. We retain the right to deny access to anyone to the Websites and the services we offer, at any time and for any reason, including, but not limited to, for violation of this Agreement.
The content and information on the Websites (including, but not limited to, messages, data, information, text, music, sound, photos, graphics, video, icons, software, code), as well as the infrastructure used to provide such content and information, is proprietary to us and/or vendor suppliers. You agree not to otherwise modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, impose large loads on our infrastructure, transfer, or sell or re-sell any information, software, products, or services obtained from or through these Websites, “mirror” or otherwise incorporate any part of the Websites into any other websites without our prior written authorization; attempt to modify, translate, adapt, edit, decompile, disassemble, or reverse engineer any part of the Websites or the services; post reviews on products offered by your current employer or by direct competitors of your current employer’s products; or log in using an alias that masks your true identity.
REVIEWS, COMMENTS AND USE OF OTHER AREAS
Please be aware that by submitting content to these Websites by electronic mail, postings on these Websites or otherwise, including any product reviews, questions, comments, suggestions, forums, ideas or the like contained in any submissions (collectively, “Submissions”), you grant CAD/CAM Connect and its affiliates a nonexclusive, royalty-free, perpetual, transferable, irrevocable and fully sublicensable right to (a) use, reproduce, modify, adapt, translate, distribute, publish, create derivative works from and publicly display and perform such Submissions throughout the world in any media, now known or hereafter devised; and (b) use the name that you submit in connection with such Submission. You acknowledge that CAD/CAM Connect will only provide direct attribution of your reviews or comments with your permission or in order to cooperate with legitimate governmental requests, subpoenas or court orders. You acknowledge and agree that no Submissions will include confidential or proprietary information of a third party or information that you otherwise are not allowed to disclose to the public.
The Sites may contain discussion forums, bulletin boards, review services or other forums in which you or third parties may post reviews of experiences using technologies or other content, messages, materials or other items on the Sites (“Interactive Areas”). If CAD/CAM Connect provides such Interactive Areas, you are solely responsible for your use of such Interactive Areas and use them at your own risk. By using any Interactive Areas, you expressly agree not to post, upload to, transmit, distribute, store, create or otherwise publish through the Sites any of the following:
Any message, data, information, text, music, sound, photos, graphics, code or any other material (“Content”) that is unlawful, libelous, defamatory, obscene, pornographic, indecent, lewd, suggestive, harassing, threatening, invasive of privacy or publicity rights, abusive, inflammatory, fraudulent or otherwise objectionable; Content that would constitute, encourage or provide instructions for a criminal offense, violate the rights of any party, or that would otherwise create liability or violate any local, state, national or international law. Content that may infringe any patent, trademark, trade secret, copyright or other intellectual or proprietary right of any party; Content that impersonates any person or entity or otherwise misrepresents your affiliation with a person or entity, including CAD/CAM Connect; Unsolicited promotions, political campaigning, advertising, contests, raffles, or solicitations; Private information of any third party, including, without limitation, surname (family name) addresses, phone numbers, email addresses, Social Security numbers and credit card numbers; Viruses, corrupted data or other harmful, disruptive or destructive files; Content that is unrelated to the topic of the Interactive Area(s) in which such Content is posted; or Content or links to content that, in the sole judgment of CAD/CAM Connect, (a) violates the previous subsections herein, (b) is objectionable, (c) which restricts or inhibits any other person from using or enjoying the Interactive Areas or the Sites, or (d) which may expose CAD/CAM Connect or its affiliates or its users to any harm or liability of any type. CAD/CAM Connect takes no responsibility and assumes no liability for any Content posted, stored or uploaded by you or any third party, or for any loss or damage thereto, nor is CAD/CAM Connect liable for any mistakes, defamation, slander, libel, omissions, falsehoods, obscenity, pornography or profanity you may encounter. As a provider of interactive services, CAD/CAM Connect is not liable for any statements, representations or Content provided by its users in any public forum, personal home page or other Interactive Area. Although CAD/CAM Connect has no obligation to screen, edit or monitor any of the Content posted to or distributed through any Interactive Area, CAD/CAM Connect reserves the right, and has absolute discretion, to remove, screen or edit without notice any Content posted or stored on the Sites at any time and for any reason, and you are solely responsible for creating backup copies of and replacing any Content you post or store on the Sites at your sole cost and expense.
If it is determined that you retain moral rights (including rights of attribution or integrity) in the Content, you hereby declare that (a) you do not require that any personally identifying information be used in connection with the Content, or any derivative works of or upgrades or updates thereto; (b) you have no objection to the publication, use, modification, deletion and exploitation of the Content by CAD/CAM Connect or its licensees, successors and assigns; (c) you forever waive and agree not to claim or assert any entitlement to any and all moral rights of an author in any of the Content; and (d) you forever release CAD/CAM Connect, and its licensees, successors and assigns, from any claims that you could otherwise assert against CAD/CAM Connect by virtue of any such moral rights.
THE INFORMATION, SOFTWARE, PRODUCTS, AND SERVICES PUBLISHED ON THIS WEBSITESS MAY INCLUDE INACCURACIES OR ERRORS. CAD/CAM CONNECT, ITS SUBSIDIARIES AND CORPORATE AFFILIATES (COLLECTIVELY, THE “CAD/CAM CONNECT COMPANIES”) DO NOT GUARANTEE THE ACCURACY OF, AND DISCLAIM ALL LIABILITY FOR ANY ERRORS OR OTHER INACCURACIES RELATING TO THE INFORMATION AND DESCRIPTION OF THE TECHNOLOGY PRODUCTS AND RELATED SERVICES DISPLAYED ON THIS WEBSITESS (INCLUDING, WITHOUT LIMITATION, THE PRICING, SCREEN SHOTS, VIDEOS, LIST OF PRODUCT AND SERVICE FEATURES, VENDOR COMPANY INFORMATION, GENERAL PRODUCT DESCRIPTIONS, ETC.). THE CAD/CAM CONNECT COMPANIES MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THE INFORMATION, SOFTWARE, PRODUCTS, AND SERVICES CONTAINED ON THIS WEBSITESS FOR ANY PURPOSE, AND THE INCLUSION OR OFFERING OF ANY PRODUCTS OR SERVICES ON THIS WEBSITESS DOES NOT CONSTITUTE ANY ENDORSEMENT OR RECOMMENDATION OF SUCH PRODUCTS OR SERVICES BY THE CAD/CAM CONNECT COMPANIES. ALL SUCH INFORMATION, SOFTWARE, PRODUCTS, AND SERVICES ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND.
IN NO EVENT SHALL THE CAD/CAM CONNECT COMPANIES (AND THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, AND AFFILIATES) BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR IN ANY WAY CONNECTED WITH, YOUR ACCESS TO, DISPLAY OF OR USE OF THIS WEBSITESS OR WITH THE DELAY OR INABILITY TO ACCESS, DISPLAY OR USE THIS WEBSITESS (INCLUDING, BUT NOT LIMITED TO, YOUR RELIANCE UPON OPINIONS APPEARING ON THIS WEB SITES; ANY COMPUTER VIRUSES, INFORMATION, SOFTWARE, LINKED SITESS, PRODUCTS, AND SERVICES OBTAINED THROUGH THIS WEBSITESS; OR OTHERWISE ARISING OUT OF THE ACCESS TO, DISPLAY OF OR USE OF THIS WEBSITESS) WHETHER BASED ON A THEORY OF NEGLIGENCE, CONTRACT, TORT, STRICT LIABILITY, OR OTHERWISE, AND EVEN IF CAD/CAM CONNECT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
The limitation of liability reflects the allocation of risk between the parties. The limitations specified in this section will survive and apply even if any limited remedy specified in these terms is found to have failed of its essential purpose. The limitations of liability provided in these terms inure to the benefit of the CAD/CAM Connect Companies.
You agree to defend and indemnify the CAD/CAM Connect Companies and their respective affiliates and any of their officers, directors, employees and agents from and against any claims, causes of action, demands, recoveries, losses, damages, fines, penalties, liabilities or other costs or expenses of any kind or nature including but not limited to reasonable legal and accounting fees, brought by third parties as a result of:
(i) your breach of this Agreement or the documents referenced herein;
(ii) your violation of any law or the rights of a third party; or
(iii) your use of the Websites.
LINKS TO THIRD-PARTY SITES
The Websites may contain hyperlinks to websites operated by parties other than CAD/CAM Connect. Such hyperlinks are provided for your reference only. We do not control such websites and are not responsible for their content or the privacy or other practices of such websites. Further, it is up to you to take precautions to ensure that whatever links you select or software you download (whether from this Websites or other websites) is free of such items as viruses, worms, trojan horses, defects and other items of a destructive nature. Our inclusion of hyperlinks to such websites does not imply any endorsement of the material on such websites or any association with their operators. In some cases you may be asked by a third party sites to link your profile on CAD/CAM Connect to a profile on another third party sites. Choosing to do so is purely optional, and the decision to allow this information to be linked can be disabled (with the third party sites) at any time.
CONTENT AVAILABLE ON THE WEBSITES
Unless otherwise specified, the content on the websites are presented solely to provide information regarding and to promote CAD/CAM Connect’s services, websites, partners and other products available in the United States. The CAD/CAM Connect websites are controlled and operated by CAD/CAM Connect from its offices in the state of Texas in the United States. CAD/CAM Connect makes no representation that materials on the CAD/CAM Connect websites are appropriate or available for use outside the United States. Those who choose to access the CAD/CAM Connect websites from outside the United States do so on their own initiative and are responsible for compliance with local laws, if and to the extent that local laws are applicable.
COPYRIGHT AND TRADEMARK NOTICES
All contents of the Websites are: © Copyright 2015 CAD/CAM Connect All Rights Reserved. CAD/CAM Connect is not responsible for content on websites operated by parties other than CAD/CAM Connect. CAD/CAM Connect, its logo and all other product or service names or slogans displayed on the Sites are registered and/or common law trademarks of CAD/CAM Connect and/or its suppliers or licensors, and may not be copied, imitated or used, in whole or in part, without the prior written permission of CAD/CAM Connect or the applicable trademark holder. In addition, the look and feel of the Sites, including all page headers, custom graphics, button icons and scripts, is the service mark, trademark and/or trade dress of CAD/CAM Connect and may not be copied, imitated or used, in whole or in part, without the prior written permission of CAD/CAM Connect. All other trademarks, registered trademarks, product names and company names or logos mentioned in the Sites are the property of their respective owners. Reference to any products, services, processes or other information, by trade name, trademark, manufacturer, supplier or otherwise does not constitute or imply endorsement, sponsorship or recommendation thereof by CAD/CAM Connect.
Other logos and product and company names mentioned herein may be the trademarks of their respective owners. If you are aware of an infringement of either your brand or our brand, please let us know by e-mailing us at firstname.lastname@example.org
The Websites are operated by a U.S. entity and this Agreement is governed by the laws of the State of Texas, USA. You agree that all claims you may have against CAD/CAM Connect arising from or relating to the Sites must be heard and resolved in a court of competent subject matter jurisdiction located in the State of Texas.
This Agreement (and any other terms and conditions referenced herein) constitutes the entire agreement between you and CAD/CAM Connect with respect to the Websites and it supersedes all prior or contemporaneous communications and proposals, whether electronic, oral, or written, between you and CAD/CAM Connect with respect to the Websites.
Fictitious names of companies, products, people, characters, and/or data mentioned on the Websites are not intended to represent any real individual, company, product, or event. Any rights not expressly granted herein are reserved.
Questions and Contact Information
For questions or site feedback contact us at email@example.com . Or, you can write to us at:
13011 Wire Road Leander, Texas 78641
1 (512) 663-2102
© Copyright 2017 CAD/CAM Connect All Rights Reserved.